Despite all having a similar 351 cubic inch displacement, there are a few distinct types of Ford “351” engines, like this Cleveland pictured here. (Image/Jim Smart)

Engines are often identified by their displacement, like the ubiquitous Chevy 350, Mopar 440, or Ford Five-Oh.

But displacement alone isn’t always the best differentiator, and nowhere is that more evident than with the Ford 351 engines.

Sure, ‘351’ refers to the engine size, but there were essentially three major versions of the Ford 351—the Windsor, Cleveland, and Modified*.

*Officially, Ford never called these engines 400/351 Modified or 400M/351M. “Modified” was a slang designation originally applied by Ford enthusiasts, and the name just stuck. You’ll also hear folks define the “M” as “Michigan” after the engine’s original casting plant. The etymology doesn’t really matter, it’s just a way for us to distinguish it from the other 351 engines.

What version you have is very important to know, because major parts from each engine are not interchangeable.

To clear up any confusion, and to help you avoid buying the wrong parts, here’s a quick rundown on each motor so you can know for sure what you’ve got in your garage.

Summit Racing‘s Tom Lynch contributed to this article. And you may enjoy this story penned by OnAllCylinders contributor Jim Smart: Getting to Know Ford’s Beasty 351C

351 Windsor vs. 351 Cleveland vs. 351 Modified

351 Windsor

The 351W is named for the factory in Windsor, Ontario that produced them. It is part of the long-running Ford small block Windsor V8 family, which also includes the venerable Ford 302 (5.0L) V8. It shares the same small block V8 bellhousing pattern and motor mounts of the August 1964+ Windsor engines*. Key differences from the other Windsor engines include a taller deck height, unique firing order, and longer stroke.

*Pre-August 1964 engines (221/260/289) had a narrow 5-bolt bellhousing pattern, also referred to as the early V8 Windsor pattern. All post-August 1964 Windsor engines use a wider 6-bolt pattern (including all 351W), commonly referred to as the small block V8 pattern. The patterns are not interchangeable.

It’s far more common than the 351 Cleveland, and though it doesn’t have the “high performance” aura of its 351C counterpart, there is plenty of aftermarket support for it. Engine builders and hotrodders have no problems pulling gobs of horsepower out of these engines, and popular upgrades include cylinder heads, camshaft, headers, and intake manifold.

Ford-351-Windsor
The 351 Windsor is a common sight under the hood of older Ford cars and trucks. (Image/Summit Racing)

351 Cleveland

The 351C was built in Ford’s Cleveland, Ohio factory, and is part of the Ford 335 engine family. Back in the day, the 351C was considered the go-to Ford performance engine, thanks to its better-flowing cylinder heads and stronger crankshaft. Ford made both 2V and 4V cylinder head versions for the 351C, with the latter 4V heads being the more performance-oriented versions.

Unfortunately, Ford only produced the 351 Cleveland for five years (in the U.S. at least, Australia got the engine up until 1982). The engine’s rarity makes it a more expensive platform for an engine build, though it’s capable of making impressive power with the right upgrades. And, for what it’s worth, there’s still a ton of Blue Oval cache in saying you’ve got a real Cleveland under your hood.

rear shot of a 1972 detomaso pantera with its back hatch up so you can see the ford cleveland engine
The 351 Cleveland wound its way into a lot of awesome rides—including the De Tomaso Pantera. (Image/OnAllCylinders)

351 Modified

The 351M is part of the same Ford 335 V8 engine series as the 351 Cleveland. It’s based off of the 400 Modified engine (see note on nomenclature in opening paragraph), which was essentially a 351C with a longer stroke. Unlike the 351C however, the 400 block had the bellhousing bolt pattern of 385-series big blocks. It also had a higher deck height to accommodate the longer stroke.

As the 351 Cleveland faded away, Ford engineers reverted to the original 351C’s 3.5-inch stroke, yet retained the 400’s deck height to create the 351M. The bellhousing bolt pattern on the 351M uses the same pattern as the 385-series big block engines as well.  (That means, even though they’re related, transmissions, intake manifolds, and other parts may not be interchangeable between a 351C and 351M.)

It’s also worth noting that the 351M was only available from the factory with a 2-barrel carburetor.

How can you tell the difference between the Ford 351 engines by looking at them?

Three Easy Visual Differences Between the 351W and 351C/351M.

  • Radiator Hose. On a Cleveland/Modified engine, the radiator hose (and thermostat housing) sticks vertically right out of the top of the engine block. Windsor engines have the radiator hose and thermostat installed into the intake manifold, where it exits from the front of the engine.
  • Valve Covers. Windsor valve covers use 6-bolt covers, whereas the Cleveland/Modified uses 8-bolt covers.
  • Timing Chain. Cleveland/Modified engines have the timing chain recessed into the front of the block itself, and its timing cover is essentially just a flat piece of metal. The Windsor’s timing chain attaches to the front of the engine and has an external timing cover typically made of cast aluminum.

Three Easy Visual Differences Between the 351C and 351M

  • Cleveland engines share a bellhousing bolt pattern with the Windsor family. 351M engines use the bellhousing bolt pattern of the 385-series Ford big blocks.
  • Due to a higher deck, the 351M’s intake manifold is wider than a 351C.
  • Motor Mounts. 351 Cleveland mounts use two bolts to attach to the engine, whereas the Modified uses three.

If you’re not sure what bellhousing you have, check out this handy transmission I.D. chart.

Why are There 3 Ford 351 Engines?

Though they share displacements, each motor was built and configured for different applications.

For instance, the 4V-351 Cleveland went in the top-tier performance cars, but the 2V351C engines could be found in a smattering of medium-to-full size 1970-74 passenger sedans too. By comparison, the 351M was used in 1975-82 passenger cars, light trucks, and SUVs.

(Ford engineers however, seemed to have stuffed a 351 Windsor in darn-near everything short of their coffee makers.)

351c cleveland engine equipped with trick flow cylinder heads under the hood of a 1969 mercury cyclone spoiler 2 land speed record car
This hopped-up 351 Cleveland was spotted in a Mercury Cyclone Spoiler II Land Speed Record Car. (Image/OnAllCylinders)

And that’s what causes the confusion. Swaps between the three engines are common, so you can’t always match the engine to the vehicle you found it in. And, given the lack of interchangeability between key components, it’s absolutely critical to know what you’re wrenching on.

To put it into perspective, Ford offered the 351 Cleveland from 1970-74 (in the U.S.) and the 351 Modified from 1975-82. The 351 Windsor was available from 1969-97, making it by far the most common engine of the trio.

As a final historical footnote, the introduction of the overhead-cam Ford Modular V8 in 1991 meant that the Windsor, Cleveland, and Modified engines represent the final pushrod V8s designed by Ford.*

*Update: Not so fast! Ford recently unveiled the mighty 7.3 Liter Godzilla pushrod V8, check it out here: Ford 7.3L “Godzilla” Engine Guide: Block, Camshaft, Cylinder Head Specs & Build Info

Share this Article