Engine Guides / LS Engines

LH6 5.3L Engine Specs: Performance, Bore & Stroke, Cylinder Heads, Cam Specs & More

The LH6 engine is a 5.3L Gen. IV aluminum engine that replaced the LM4 in 2005. It was the first Gen. IV LS truck engine and offered Active Fuel Management (AFM).

The LH6 was available in mid-size SUVs until 2009, and in GM pickups from 2007-09. For marketing purposes, it was also known as the Vortec 5300. The engine specs and information listed here is for a stock LH6 engine.

Mechanically similar, General Motors’ LS and LS-based Vortec engines wound up on almost every branch of the GM family tree: Chevy, Pontiac, GMC, Cadillac, Buick—heck, even Saab, Hummer, and Isuzu got some LS love.

Since LS and Vortec engines are so common, they’ve become the go-to performance and swap engines of the modern era.

These motors are capable of making a lot of horsepower, and respond well to upgrades like turbos, superchargers, high-flow cylinder heads, intake systems, cams, and nitrous oxide.

[Looking to upgrade your LH6 engine? Check out LH6 5.3L Engine Upgrade Guide: Expert Advice for LH6 Mods to Maximize Performance.]

The aftermarket is strong, crate engines are available, and used motors are often cheaply sourced through junkyards.

Summit Racing has created a series of comprehensive guides for each engine in the LS family, so engine builders and tuners can have a handy reference for their projects.

This specific guide is for the GM LH6 5.3L Vortec 5300.

You can find more LS engine spec guides and LS-related information here.

(Summit Racing’s Paul Spurlock and Brian Nutter contributed to this article.)

LH6 5.3L Vortec 5300 Engine Specs

LH6 Performance Specifications

Engine Ratings
Compression Ratio9.9:1
Horsepower Rating302-315 hp
Torque Rating330-338 ft./lbs.

LH6 Applications

VIN 8th DigitYearMakeModel
M2005-06ChevroletTrailblazer EXT
M2005-06GMCEnvoy XL, XUV
M2005-06IsuzuAscender
M2005-07BuickRanier
M2005-09GMCEnvoy Denali
M2005-09Saab9-7X 5.3i, ARC
M2006-08ChevroletTrailblazer
M2007-09ChevroletSilverado 1500
M2007-09GMCSierra 1500

LH6 Engine Blocks

LH6 Engine Block Specs
Casting Numbers125771048, 12601900, 12569513, 12568573
MaterialAluminum
Displacement5.3L / 325 c.i.d.
Bore Dia. 3.780 in.
Stroke3.622 in.
Deck Height9.240 in.
Bore Spacing4.400 in.
Thrust Bearing Location#3 Main
Main Cap Style6-Bolt
Main Housing Bore Dia.2.751 in.
Cam Housing Bore Dia.Bore 1/5 = 2.346, Bore 2/4 = 2.326, Bore 3 = 2.307
Cam-to-Crank Centerline4.914 in.

LH6 Rotating Assembly

LH6 Rotating Assembly Specs
Piston MaterialHypereutectic Cast Aluminum Alloy
Piston StyleFlat Top
Piston Volume0cc
Wrist Pin Dia.0.9431 in. (full floating)
Connecting Rod MaterialPowdered Metal
Connecting Rod StyleI-Beam
Connecting Rod Length6.098 in.
Connecting Rod Housing Bore2.225 in.
Connecting Rod BoltsM9 x 1 x 43
Connecting Rod Part Number12649190
Connecting Rod Casting Number (last 3 digits)143
Crankshaft MaterialCast Iron
Crankshaft Part Number12574522
Crankshaft Casting Number (last 3 digits)216
Crankshaft Main Journal2.559 in.
Crankshaft Rod Journal2.100 in.
Reluctor Wheel24X (2005-06), 58X (2007-09)

LH6 Cylinder Heads

LH6 Cylinder Head Specs
Casting Numbers799, 243
MaterialAluminum
Combustion Chamber Volume65cc
Intake Port ShapeCathedral
Intake Runner Volume210cc
Exhaust Port ShapeD-Port
Exhaust Runner Volume75cc
Intake Valve Diameter2.000 in.
Exhaust Valve Diameter1.575 in.
Cylinder Head Bolt StyleTorque to Yield (TTY)
Cylinder Head Bolt Size(10) M11 x 2 x 100, (5) M8 x 1.25 x 45

LH6 Camshaft Specifications

LH6 Camshaft Specifications
Years2005-062007-09
Part Number1256952512625436
Duration @ .050 in. (int./exh.)Not Available196°/201°
Valve Lift (int./exh.)Not Available0.481 in./0.481 in.
Lobe SeparationNot Available116°+2
Cam Gear Attachment3-Bolt1-Bolt
Cam Gear Poles1x4x
Active Fuel Management (AFM) YesYes
Variable Valve Timing (VVT)NoNo

LH6 Valvetrain

LH6 Valvetrain Specs
Lifter StyleHydraulic Roller
Lifter Link StylePlastic Lifter Tray
Lifter Body Diameter0.842 in.
Pushrod Length7.385 in.
Rocker Arm Mounting StylePedestal
Rocker Arm StyleDie-Cast, Roller Fulcrum
Rocker Ratio1.7
Rocker OffsetNone
Valve Spring StyleBeehive
Valve Spring ColorNatural
Valve Angle15 Degrees
Intake Valve MaterialSteel - Solid Stem
Intake Valve Dia.2.000 in.
Exhaust Valve MaterialSteel - Solid Stem
Exhaust Valve Dia.1.575 in.
Timing Chain Guide StylePlastic Guide (2005-06), Spring Loaded Tensioner (2007-09)

NOTE: You can find engine specs and detailed engine upgrade advice for every LS and LS-based Vortec truck engine in one place: The Definitive Guide to LS Engine Specs and LS Engine Upgrades.

Tags: , , , , ,

16 Comments

  1. Pingback: LH6 5.3L Engine Upgrade Guide: Expert Advice for LH6 Engine Mods to Maximize Performance - OnAllCylinders

  2. Can I swap in a LM4 for a blown LH6?

  3. Great oil press hot. Less cold. Bottom noise worse when or after hot.Any known pump or strainer problems? About to pull pan to look. Any advise? Runs strong!

    • Don Schannot says:

      Check the O-ring on the oil pump pick up tube where it mounts to the pump. These are usually split or badly cracked. Got this tip from a Richard Holdener YouTube segment.

  4. Ethan Rogers says:

    Can I swap lh6 24x with a lh6 58x and have it work?
    06 envoy Denali with a 2010 lh6.
    Thank you

    • Yes Texas speed has what you need! Get at them and they will be happy to help.

    • Or just get it tuned for the reluctor count and you’re good to go.

      • How/where to tune the reluctor count going from an 07 58x engine to an 06 24x ECM?

        • You can’t tune the computer for the different reluctor wheel counts 24x vs 58x, that is incorrect. You can step down from the newer 58x to 24x with a Lingenfelter TRG-002 conversion box, but the computer will otherwise not work with 58x signal. You also cannot go the other way and run a 24x engine in a newer 58x application, there is no conversion for that. (posting for future researchers)

  5. I want to swap my Lh6 to get away from DoD what engine can I use ? I have a 06 envoy Denali

  6. Peter Stockbauer says:

    My 2006 trailblazer 5.3 has a cast block do you have them in a short block.Also how much

  7. buen dia, quiero eliminar el AFM . DOD de mi motor LH6 5.3 , se puede hcer?…….como se hace?
    es para una GMC envoy 2008

  8. i have a lh6 with upgraded cam (btr ls1 stage 1) and caddy racing lifters, would it be beneficial to upgrade the oil pump to a melling high pressure pump. or does the stock provided adequate oiling.
    also any recommendation on upgraded rocker arms. i have comp cams trunnion kit in stock arms but its starting to make noise. car sits most the time and is noisier when first started.
    i thinking they might be not getting lubed up good.

  9. Benjamin m Giesbrecht says:

    I have a fully loaded 05 trailblazer ext, 286,xxx km on it. My way home from visiting family two nights so I started to hear a clunking/knocking sound. I was ten minutes from home and probably shouldn’t have kept going but vehicle shut off slut 3 blocks from home. Sunny turn over, till over nothing. The key clicks once and I get power to everything (till the battery dies) I’m guessing a piston or two went and my engine is shot. My question is do I sell it to national salvage for the steel, try part it out, or any suggestions?

Leave a Reply to Adam Cancel

Your email address will not be published.

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.