Engine & Exhaust / How Tos

Video: How to Check Piston Ring Gap

Proper piston ring gap is a delicate balance.

Too much gap and compression gases and heat will blow by, causing loss of power and torque. Too little gap and the rings can over-expand due to the heat and cause damage to the engine bores or ring lands. In short, ring gap has a direct effect on engine performance and longevity.

Piston ring manufacturers typically include ring gap recommendations for their products. The key is to check the initial ring gap and make any necessary adjustments with piston ring file as necessary.

So what’s the process for checking piston ring gap?

This video covers how to check piston ring gap using a feeler gauge or feeler gauge set, along with a piston ring squaring tool. Keep in mind, ring gap recommendations will vary based on bore size, expected engine pressures, and heat. Things like intended use (street or race) and engine setup (naturally aspirated versus forced induction) will play a part. Do not assume the rings have been pre-gapped or begin the ring gapping process without reading the recommendations from the manufacturer.

To check your ring gaps, you’ll need the following tools:

Tags: , ,


  1. Russell J Parisi Jr says:

    excellent video on ring gapping, but to make an adjustment is it better to use one of those ring cutters or a file and a block of wood ? Do you sell ring gapping cutters?

  2. Wild Harold says:

    You should gap the rings for each cylinder in the same cylinder bore that the rings will go in. Not gap the top ring in one cylinder and the second ring in another cylinder due to there might be a few thousands difference in the bore. That is not the way to gap piston rings at all. Same on you for this misleading video.

  3. Pingback: Video: How to Check Piston Ring Gap

  4. Darryl H. Alvarez says:

    Piston ring can be checked easily by following footsteps of the guidelines which are given on this blog page which https://resumecompaniesreview.com/findmyprofession-com-review/ site provides quality work. Video is given on this blog page in which information has been shared fully. Video is a nice way to elaborate on things.

Leave a Reply to Darryl H. Alvarez Cancel

Your email address will not be published.


This site uses Akismet to reduce spam. Learn how your comment data is processed.