An LS1 in a 1932 Ford?

An LS3 in a first-generation Camaro?

Why…it’s just not natural.

But that doesn’t mean it’s a bad idea. As a matter of fact, swapping a modern LS motor into an older hot rod offers plenty of advantages, including outstanding horsepower potential, lightweight and compact design, and improved fuel economy over the Gen I small block thanks to its EFI setup. Thankfully, the aftermarket has begun to catch up with the LS movement, producing an increased amount of LS go-fast parts — many of which are covered in our ongoing series of LS swap videos.

While it still may not seem natural to put a new-age LS1 in an old-school Ford, it has become more easily achievable thanks to the off-the-shelf engine mounts available for LS swaps. A decade ago you might have had to fabricate engine mounts for the job, but today companies like Hooker and Trans-Dapt offer ready-made mounts for many LS swap scenarios. This makes it that much easier to drop a Gen III or IV engine into an engine bay where it was never intended to go. From there, you can add the appropriate engine swap headers, transmission adapters, oil pans, and other components you need to complete the transplant.

But it all starts with the engine mounts.

Watch the video below to learn about some of the LS engine swap mounts that are available. Then, check out the Summit Racing website for some of the other key components you need, courtesy of Holley and Hooker.

Author: David Fuller

David Fuller is OnAllCylinders' managing editor. During his 20-year career in the auto industry, he has covered a variety of races, shows, and industry events and has authored articles for multiple magazines. He has also partnered with mainstream and trade publications on a wide range of editorial projects. In 2012, he helped establish OnAllCylinders, where he enjoys covering all facets of hot rodding and racing.