Tech Articles

2003-08 Mopar Gen. III 5.7L Hemi Engine Guide: Bore & Stroke, Cylinder Heads, Cam Specs & More

(Image/Summit Racing – Mopar Replacement)

When Chrysler announced it was bringing back the legendary Hemi in the early 2000s, it was a big deal. This new series of Hemi engines is often referred to as the “Gen. 3” after the first generation FirePower (1951-59) and second generation Elephant 426 (1964-71).

Note: This Spec Guide is part of a series of Hemi Engine Spec guides we’re putting together. See Other Hemi Engine Spec Guides Here.

The Hemi Returns!

The first edition of the third generation Mopar Hemi engine made its debut in 2003 Dodge Ram trucks and featured a 5.7 liter (345 cubic inch) displacement.

Still considered a small-block engine based on displacement, the 5.7L Gen. III Hemi uses a hemispherical combustion chamber with two spark plugs per cylinder and small wedge flats along with excellent intake and exhaust ports.

This 5.7L engine configuration would be the basis for future Hemi displacement variations.

This Engine Guide is Specifically for the 2003-08 Mopar Gen. III 5.7L Hemi Engine.

2003-08 Mopar Gen. III 5.7L Hemi Engine Performance

Mopar 5.7L Hemi Performance Ratings
VersionTruckCar
Displacement5.7L5.7L
Compression Ratio9.6:19.6:1
Horsepower 345 hp340 hp
Torque375 lb.-ft.390 lb.-ft.

2003-08 Mopar Gen. III 5.7L Hemi Engine Identification

Mopar 5.7L 2003-08 Truck Engine Applications
VIN Number DigitYearMakeModel
8th digit of VIN: “D” 2003-08DodgeRam 1500

2003-08 Mopar Gen. III 5.7L Hemi Engine Block Specs

Mopar 5.7L Hemi Block Specs
Casting Numbers53021319AG
53021319CB
50321314 DR
MaterialIron
Displacement5.7L / 345 c.i.d.
Bore Dia.99.5mm / 3.92"
Stroke90.9mm / 3.58"
Deck Height9.25"
Bore Spacing4.46"
Thrust Bearing LocationNumber 3
Main Cap Style2 Bolts with 2 Lateral Cross-Bolts (All 5 Mains)
Cam-to-Crank Centerline7.44"

2003-08 Mopar Gen. III 5.7L Hemi Engine Rotating Assembly

Mopar 5.7L Hemi Rotating Assembly Specs
Piston MaterialHypereutectic
Piston StyleFlat Top with Valve Notches
Piston Ring Package1.5mm, 1.5mm, 3.0mm
Wrist Pin Diameter0.9456"
Connecting Rod MaterialPowdered Metal
Connecting Rod StyleI-Beam
Connecting Rod Length6.242"
Connecting Rod Bearing Bore2.125"
Connecting Rod Bolts9.0mm x 1
Crankshaft MaterialNodular Iron
Crankshaft Part Number53021302AD
Crankshaft Casting Numbers53021319AG
53021319CB
53021300AA
Crankshaft Main Journal Dia.2.559"
Crankshaft Rod Journal Dia.2.126"
BalanceInternal
Crankshaft Reluctor Count32x
Crankshaft Mounting Flange8 Bolts

2003-08 Mopar Gen. III 5.7L Hemi Engine Cylinder Heads

Mopar 5.7L Hemi Cylinder Head Specs
Casting Numbers53021300AJ (Right)
53021300BA (Left)
Cylinder Head MaterialAluminum
Combustion Chamber Volume85cc
Combustion Chamber DesignHemispherical, with Quench & 2 Spark Plugs Per Cylinder
Intake Port ShapeSquare, with Dimple
Intake Runner Volume161cc
Exhaust Port ShapeSquare
Exhaust Port Volume50cc
Intake Valve Diameter2.00"
Exhaust Valve Diameter1.55"
Cylinder Head Bolt StyleTorque to Yield (TTY)
Cylinder Head Bolt SizeM12 x 1.5mm & 8mm

2003-08 Mopar Gen. III 5.7L Hemi Engine Camshaft Specs

Mopar 5.7L Hemi Camshaft Specs
DesignHydraulic Roller
Advertised Duration
(Intake/Exhaust)
260 / 268
Valve Lift
(Intake/Exhaust)
.0472" / .0460"
Cam Journal Dia.2.24" / 57mm Front (Smaller to the Rear)

2003-08 Mopar Gen. III 5.7L Hemi Engine Valvetrain Specs

Mopar 5.7L Hemi Valvetrain Specs
Lifter DesignHydraulic Roller
Lifter Link StylePlastic Guide x 4
Lifter Body Diameter0.842"
Pushrod LengthVaries by Application
Rocker Arm Mounting StyleShaft
Rocker Arm StyleDie Cast, Roller Fulcrum
Rocker Ratio1.60:1 (Intake)
1.66:1 (Exhaust)
Rocker OffsetNone
Valve Spring StyleBeehive
Valve Angle18° (Intake)
16.5° (Exhaust)
Intake Valve MaterialSteel, Solid Stem
Intake Valve Diameter2.00"
Exhaust Valve MaterialSteel, Solid Stem
Exhaust Valve Diameter1.55"
Valve Stem Diameter0.3125"
Timing Chain Guide StyleSpring-Loaded Tensioner

Other 2003-08 Mopar Gen. III 5.7L Hemi Engine Specs

5.7L Hemi Throttle Body, Fuel Injectors, Oil Pan Specs & More
Intake ManifoldComposite, Fixed Runner Length
Throttle Body80mm
Throttle ControlElectronic
Fuel Injector Part Number4591851AB
(& Multiple Alternates)
Fuel Injector Flow26 lb./hr. @ 58 PSI
Flex Fuel CapableNo
Fuel Injector ConnectorUSCAR, EV6
PCM NG3C / NGC4
Crankshaft Reluctor Ring32 Teeth
Camshaft Sensor LocationPassenger Side, Front
Oil PanVaries by Application
Oil PumpGerotor
Variable Valve Timing (VVT)No
Multi-Displacement System (MDS)Yes, on 2005+ Models
Firing Order1-8-4-3-6-5-7-2
Total Weight, Full Dress560 lbs.
Tags: , , , , , , ,

6 Comments

  1. Pingback: 2003-08 Mopar Gen. III 5.7L Hemi Engine Guide: Bore & Stroke, Cylinder Heads, Cam Specs & More

  2. brian Tousignant says:

    Would like this same info in the future for the later 5.7 Hemi 09 & up.Thanks.

  3. Harold Lovett says:

    I have a 1969 Dodge Dart. Will a 5.7 HEMI fit into the engine bay? Will have to get a new bell housing for the 4spd.to mount to? I found a lot of 5.7 HEMI’s in the Pull A Part junk yard this week. Thanks for the information on the part numbers and casting numbers.

  4. What is the best way to get an additional 50 to 100 HP out of a 2003 Dodge Ram 1500 quad cab with 4WD and a 5.7 Liter Hemi in it? Actually looking for low end torque improvement for towing as much as anything.

  5. i wish someone would publish a complete listing of casting numbers for the gen 3 hemi years 2003-2008, the years before the eagle head. I always see the 53021300AJ (Right) and 53021300BA (left) as the only head number talked about. I have a set of heads 53021608BL and BJ respectively that i want to use, unless there is a way of deciphering mopar part numbers that i am not aware of, i dont understand. i type in google this 53021608BL head number and it came back with posts from old forums as 300C heads in that 2003-2008 range since the intake runner is narrow and has port for injector, so why cant we build a listing of possible casting numbers for this 2003-2008 range? and second, is this a good head? are they all the same?

Leave a Reply to brian Tousignant Cancel

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.