Editor’s note: The 1980s was a transition period for engine technology in America. The iconic carburetor gave way to fuel injection. Cubic inches were out, and liter designations marked a new era for engines — one when power and fuel economy were no longer mutually exclusive. This modern engine age has featured some of the best innovation, technology, and performance yet.

So what have been the best powerplants of these last 30 years? We asked you to help us answer that very question via Facebook and Instagram. Factoring in your votes and comments, we’ll unveil the rest of the Top 10 in the coming days.

Complete_Motor

(image courtesy of midnightdsigns.com)

#5 — Ford EFI 5.0L H.O.

The #5 entry on our list isn’t just an engine.

It’s a movement. A revolution of sorts.

Ford likely didn’t realize it at the time, but when the company added EFI to its existing 5.0L H.O. engine in 1986, it was creating a hot rodding craze. The small displacement engine (302 cubic inches) wasn’t all that powerful in stock form, but combined with the lightweight Fox-body Mustangs from the era, the Ford EFI 5.0L H.O. was plenty potent.

And at 225 horsepower, there was plenty of room for improvement.

The 5.0L’s H.O. stood for “high output,” but power-hungry Ford fanatics were hungry for higher output. Soon, there were entire magazines created and dedicated to hopping up 5.0L EFI-equipped Mustangs. There was a massive proliferation of Ford 5.0L aftermarket performance parts — so much so that Summit Racing even created an entire 5.0L section in its renowned big book catalog.

It was the aftermarket that turned the EFI 5.0L H.O. into a legend.

History

The Ford 5.0L was born in 1978 — or at least that’s when the 5.0L name first appeared.

The engine was basically a carryover from Ford’s venerable 302-cubic-inch Windsor V8, but Ford decided to make the switch to the European-style “liter” moniker. The Ford 5.0L didn’t really make a name for itself until the 5.0L H.O. was introduced for the new Mustang GT in 1982. The original 5.0L H.O. engines featured a 2-barrel carburetor (and later a 4-barrel) and made 157 horsepower. It wasn’t much, but it was a step in the right direction following the performance-depraved late 1970s. The 5.0L H.O. steadily gained horsepower over the next few years thanks to upgraded cylinder heads, a hydraulic roller cam, and other changes. EFI (electronic fuel injection) was finally added to the 5.0L H.O. in 1986 and a legend was born.

Or was it?

Although the EFI 5.0L H.O. produced more torque and offered excellent midrange power, peak power was actually down by 10 horsepower in the first year of EFI. Some enthusiasts feared the direct port injection technology, and many thought it would limit their ability to modify the engine. As Ford implemented changes to the EFI 5.0L H.O., the power numbers came around — and so did enthusiasts.

Power numbers jumped from 200 horsepower to 225 in 1987 as Ford refined the induction system. Aftermarket manufacturers took notice of the EFI 5.0L H.O.’s potential and the 5.0L performance parts boom began. Meanwhile, Ford continued to stoke the fire by creating a high-powered Cobra engine, which combined the EFI 5.0L H.O. with Ford Racing Performance Parts‘ hot GT-40 induction components.

The Windsor-based EFI 5.0L H.O. was gradually replaced by Ford’s new overhead-cam Mod Motor, but not before it:

  • Restarted the Ford performance movement in the 1980s
  • Launched the EFI performance era
  • Established the Mustang Fox-body as a legit performance car
  • Breathed life into a then-stagnant aftermarket parts industry
  • Became one of the most modded hot rod engines in history — everything from budget-builds to full-on race mills

The EFI 5.0L H.O. continues to be an affordable performance engine. Its selection of aftermarket parts is rivaled only by that of the Gen. I small block Chevy. According to Summit Racing, popular upgrades include:

5.0L Engine Modifications

Author: David Fuller

David Fuller is OnAllCylinders' managing editor. During his 20-year career in the auto industry, he has covered a variety of races, shows, and industry events and has authored articles for multiple magazines. He has also partnered with mainstream and trade publications on a wide range of editorial projects. In 2012, he helped establish OnAllCylinders, where he enjoys covering all facets of hot rodding and racing.