mailbag

Q: I’m currently running a Chevy 350 that I’ve assembled myself using a 4-bolt main block bored over .040″, a cast-iron crank, forged pistons and rods, moly rings, World Products […]

Q: I own a 1976 Ford F-150 two-wheel drive pickup with a 360 engine. The piston rings are worn and need to be changed. While the engine is out, I’m […]

Q: I was driving my 1995 F-350 when the truck suddenly went completely dead. I coasted to a stop, opened the hood, and saw that the alternator charge wire was […]

Q: I’m working on building up the straight-six 250 engine in my old Squarebody Chevy pickup. It came with dual exhaust and a Rochester 2SE carburetor. I’d like to eventually […]

Q: I have a 1991 Ford Mustang LX couple with a bone-stock 302. I’ve always thought about getting an 8.8-inch ring and pinion set for my Ford, but I’m having […]

Q: A couple of questions. First, I have a 1984 Chevy S-10 pickup with a 2.8L V6 and a 5-speed manual transmission, and I want to change things up a […]

Q: My 1974 Chevy Nova has 4.11 gears, but I’m interested in changing them. I’ll be taking a long trip soon and I’d like to cruise at around 2,000 rpm […]

Q: I am in the process of upgrading a vintage Chevrolet Chevy II SS. The car is equipped with an 8.2-inch, 10-bolt rear-end with 28-spline axles and a 3.08 ring […]

Q: I am rebuilding a 350 Chevy V8 for my daily driven 1991 S-10 pickup. I want to purchase moly rings for the stock flat top pistons, Clevite 77 rod […]

Q: My car is a 1984 Pontiac Bonneville with a 500 cubic-inch Cadillac engine. The engine is bored .030″ over and uses flattop pistons and Cadillac 425 heads for a […]