Ask Away

I want to build a 350 Chevy with iron heads and a 10.0:1 compression ratio. Will that work on 91 octane pump premium fuel? H.C. Seemingly simple questions like this […]

I have a survivor ‘66 Corvette 427. I selected the Factory Muscle solid flat tappet cam as I was trying to stay as true to the original build as possible. […]

I have a 1988 Monte Carlo. I want to improve the stance and handling, and perhaps even do something to improve braking. I don’t want to build a race car […]

I have a 1971 Chevrolet 307 that I’ve decided to hot rod. In my search to find the best setup, I’ve had many different answers, mostly from helpful suggestions to […]

I am considering buying the basic Chevrolet 350 c.i.d. crate engine. I’ve heard lots of good things about it. I’d like to upgrade to a hydraulic roller cam at the […]

I have a Camaro with a 420 c.i.d. small-block Chevy that I recently bought. We pulled the engine to freshen it and the question came up as to whether my […]

I have a 355 c.i.d. small-block Chevy to which I’ve added a small Vortech centrifugal supercharger. The supercharger blows into a hat over the carburetor. For now, the engine is […]

I’ve got an old, 327 c.i.d. small-block Chevy that I started to replace the heads with a better set. My problem is I’ve stripped the threads on two head bolts […]

I have a 350 c.i.d. small-block Chevy that I’m rebuilding. It has Wiseco forged pistons with a 1/16-inch ring package and 10:1 compression, good I-beam rods, and a good steel […]

I’m building a Chevy 350 engine for my son’s circle track race car. I started out with a 0.040-over block that I think has been severely decked but I’m not […]