Parts Bin: AutoMeter Now Has a CAN Bridge for Holley & Sniper EFI Systems That Makes Adding Gauges Easy

One of the few drawbacks with converting to electronic fuel injection is that it can be difficult to add supplemental gauges to take advantage of the sensor data you get with a modern computer-controlled EFI setup.

A CAN Bridge module changes all that—and now AutoMeter has a CAN Bridge that’ll work perfectly with a broad range of the popular Holley EFI systems.

Available under part number ATM-9111, AutoMeter says this new CAN Bridge is compatible with Holley HP, Terminator, Terminator X, Terminator X Max, Sniper V1, and Sniper V2*.

*Connection to the Sniper V2 system requires the ATM-5240 harness, coming soon.

In a nutshell, the CAN Bridge module will take the sensor data coming from the Holley EFI system and translate it into usable signals for AutoMeter InVision dashes—or you can run a separate AutoMeter tachometer and electronic speedometer, and add short sweep electric temperature, pressure, and volt meter gauges instead. (Note, the system is not compatible with gauges that use a stepper motor movement.)

Better still, the AutoMeter CAN Bridge is pretty much plug and play for most applications, and you can fine-tune the system for your particular setup via pushbuttons and intuitive menus on the CAN Bridge module itself.

Not only does this make adding more gauges a breeze, it means your wiring runs are simplified and you won’t need to add any more sensors, fittings, or adapters to clutter up your engine bay. Check out the install instructions here and see for yourself.

The AutoMeter CAN Bridge module has five outputs to drive five different gauges: tachometer, speedometer, temperature, oil pressure, and a voltmeter.

Sound good? If you’re running an aftermarket Holley EFI system and want to take advantage of all that vital data feedback it provides, click the part number below for pricing and availability on this AutoMeter CAN Bridge Module. (We’ll also include an AutoMeter CAN Bridge module that’s compatible with OBD-II systems below as well.)

• ATM-9111 – AutoMeter CAN Bridge for Holley EFI Systems
• ATM-9113 – AutoMeter CAN Bridge for 2008+ OBD-II Equipped Vehicles

Want to learn more about this CAN Bridge? Check out this video: