Featured Vehicles / From the Summit Racing Catalog

The Elite Laser 917, Summit Racing’s First Project Car

Summit-Racing-917-Laser-Kit-Car

(Image/Car Craft Magazine – Jeff Smith & Dave Knapp)

It’s not uncommon for a big automotive parts company to sponsor a project car, and Summit Racing is no exception.

Through the decades, Summit Racing has supported dozens of vehicle builds—from a Factory Five Racing Mark IV Roadster and LS-swapped Miata, to a Pro-Touring Camaro and Baja 1000 Ford Bronco (and seemingly every vehicle niche in between).

So, since Summit Racing is celebrating its 50th birthday in 2018, we wanted to dig deep and find its first sponsored project car.

Did we find some Pro Street muscle car, slammed Deuce Coupe hot rod, or tire-shredding dragster?

Nope—we found a fiberglass-bodied kit car, the Elite Laser 917.

Modeled after the 1970s-era Porsche 917 race cars, the Laser was a rear-engined kit car built upon the (surprise!) Volkswagen Beetle chassis. Its unclear how many Laser 917s Elite Enterprises cranked out between 1972-82, but a Google search turned up plenty of stories on 917s in varying degrees of condition.

One of the most unique aspects of Summit Racing’s build was the powerplant. Instead of the typical air-cooled four-cylinder VW engines that are common in similar kit cars, Summit Racing tossed in a Buick 231 c.i.d. V6—a feat that required significant modifications to the original kit’s plans.

Car Craft magazine featured the Summit Racing Laser 917 in its February 1981 issue, written by none other than the fantastic OnAllCylinders contributor Jeff Smith. The story is chock-full of details on the build, and the entire piece is swimming in 1970s gearhead nostalgia.

Here’s the original article. [Click images to enlarge them for better readability.]

917-Car-Craft-Article,-Page-1

Page 1 of the Summit Racing Laser 917 Car Craft Article. (Image/Car Craft Magazine – Jeff Smith & Dave Knapp)

917-Car-Craft-Article,-Page-2

Page 2 of the Summit Racing Laser 917 Car Craft Article. (Image/Car Craft Magazine – Jeff Smith & Dave Knapp)

917-Car-Craft-Article,-Page-3

Page 3 of the Summit Racing Laser 917 Car Craft Article. (Image/Car Craft Magazine – Jeff Smith & Dave Knapp)

Tags: , ,

7 Comments

  1. I am looking for a Eilite Laser917 car for sale. If you know of one that’s for sale let me know.

  2. If you are still intrested in a Laser and havent found one,this looks to be a good one to buy.

    https://www.ebay.com/itm/1974-Replica-Kit-Makes/192725463376?hash=item2cdf553150:g:zk4AAOSwo2xb7elu:rk:1:pf:1&vxp=mtr&frcectupt=true

  3. Lony, you might also join the Facebook group, Laser 917 owners, page.

  4. I have one 423 405 2781

  5. Joseph LoVerde says:

    Hello,
    A great project to be sure.
    As a kid this was a dream for me. I loved the look of this car kit and wanted to build one however life and school took priority. The job and projects to generate revenue came next and so on. I purchased an Alfa Romeo Alfetta GTV for that road car feel and that was that.
    The inhancements you made in your 917 project are far today from yesteryear. A great design around existing structure to be sure.
    This caught my eye because the love of the Elite Laser 917 is still there in my heart!
    Thank You for all the memories and so much more.
    From The Heart,
    Best Regards,
    Joseph LoVerde
    j.loverde@yahoo.com

Leave a Reply to Jake Murphy Cancel

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.