2007_ford_mustang_coupe_premium_fq_oem_1_500
Your 2007 Ford Mustang GT came from the factory with 300 horsepower.

Of course that isn’t enough.

With a little bit of time and some basic hand tools, you can bolt on some extra horsepower for your S-197 Mustang with a cold air intake kit.

 

 

K&N 69 Series Typhoon Air Intake

69-3523KPK&N is known for their reusable air filters and they have incorporated the 100,000 mile reusable air filter into the 69 Series Typhoon Air Intake for the 2007 Mustang. The air filter provides more surface area which allows for less restrictions. The air filter is also protected from the high under-hood temperatures with a heat shield allowing a cool dense charge of air to flow directly into the throttle body. The aluminum intake tube reduces airflow restrictions and gives your Mustang more usable power throughout the entire RPM range. With a screwdriver, ratchet set, and some wrenches you can bolt on the K&N 69 Series Typhoon Air Intake in 90 minutes.

 

Ford Racing Air Intake Kit

M-9603-M463Who better to trust with your Ford Mustang than Ford Racing? The Ford Racing Cold Air kit utilizes an enhanced intake for improved performance. With the Ford Racing Cold Air Intake, you do need to utilize the Ford Racing tuner to calibrate your 2007 Ford Mustang computer to maximize the increased air into the engine.

 

 

BBK Cold Air Induction Systems

17365_2005_2009_bbk_mustang_cold_air_intake-398xDesigned to work with the factory tune and computer, the BBK Cold Air Intake for the 2007 Mustang is a great air intake system that simply bolts in to your Mustang in an afternoon. BBK has seen up to 16 horsepower gains with no other addons. The BBK Air Filter is a high-flow, reusable design that will give your Mustang miles of performance. BBK uses a custom-designed mass air housing which is machined into the inlet tube and utilizes the stock performance tune. BBK has taken the time to make sure that all of the emissions equipment remains intact so that there are no check engine lights.

 

AEM Induction Brute Force HD Air Intakes

AEM-21-8113DPThe AEM Induction Brute Force HD Air Intake is a CNC mandrel bent 6061 aluminum air intake that is available in gunmetal grey or polished aluminum.  AEM has seen gains of seven horsepower over stock at 5,800 rpm for the 2007 Ford Mustang. The engineers have gone to great lengths to make sure that the AEM air filter is protected from the underhood air temperatures via a heat shield. One of the best features of the AEM Brute Force HD Air Intake is the air filter lasts up to 100,000 miles before cleaning.  In about an hour, you can easily bolt in the AEM Brute Force HD Air Intake into your 2007 Mustang.

Keywords
Share this Article
Author: Al DiVencenzo

Al is a contributor to OnAllCylinders