How to Clean Your Jeep the Right Way: Tips, Products & Maintenance Essentials

Editor’s Note: Since Summit Racing is now the official parts supplier of Jeep Jamboree USA, we’ve asked a few of the experts with Jeep Jamboree USA to help address some common questions that we hear from folks who are new to off-roading. In this guest article, they’re answering the question:

“What’s the best way to clean a Jeep after a weekend of off-roading?”

***

Jeep owners know that owning one of these rugged vehicles is more than just transportation, it’s a lifestyle. Whether you’re navigating rocky trails, muddy riverbeds, or snow-covered backroads, your Jeep is built to handle the extremes.

But with all that adventure comes dirt, grime, and debris that can wreak havoc if not properly cleaned and maintained. A thorough, regular cleaning is essential not only to preserve the look of your Jeep but to maintain its long-term performance and value.

Here’s how to clean your Jeep properly, including product recommendations and why post-cleaning inspections matter.

Step 1: Pre-Cleaning Prep

Before you start hosing off your Jeep, remove any personal items, mats, and accessories from the interior.

If you’ve been off-roading, you may also want to take a preliminary look underneath the vehicle to knock off large clumps of mud or debris with a rubber mallet or gloved hand before you begin the full cleaning process.

Step 2: Cleaning the Exterior

1. Rinse Thoroughly: Start by rinsing your Jeep with a pressure washer or garden hose to remove loose dirt, especially in the wheel wells, undercarriage, and grille area. Focus on high-impact zones where mud accumulates most.
2. Wash with the Right Soap: Use a dedicated automotive wash soap with a soft sponge or microfiber mitt. Avoid household detergents, which can strip wax and damage your paint. Start from the top and work your way down, rinsing frequently to prevent soap from drying on the surface.
3. Pay Attention to the Undercarriage: One of the most critical parts of cleaning a Jeep is the undercarriage. Mud, sand, and rocks can pack tightly around your suspension components, brake lines, and skid plates. Over time, this can cause corrosion or mechanical failure. Use a pressure washer with an undercarriage wand or simply angle your hose to reach as much of the underside as possible.
   Pay extra attention to your differential, drive shafts, and axles. If you’re a frequent off-roader, consider investing in an undercarriage cleaner attachment for your pressure washer.

Step 3: Interior Cleaning with Smart Upgrades

The interior of a Jeep especially one with removable doors and tops is prone to exposure from the elements. That’s why having interior protection products can drastically cut down on cleaning time and effort.

1. Armorlite Flooring System: Traditional carpeted floors are not ideal for off-road enthusiasts. Armorlite flooring is a game-changer. This rugged, waterproof flooring system replaces your Jeep’s carpet with a durable, non-slip surface that resists stains, moisture, and mildew. Even better, it has built-in channels and drain plugs that make it incredibly easy to hose out the interior after a muddy day on the trail. Simply remove the drain plugs and let the water run through.
2. Seats and Dash: Use interior-safe all-purpose cleaner for vinyl, leather, and plastic components. If your Jeep has cloth seats, use a foam fabric cleaner or a portable extractor for deep cleaning. Don’t forget to clean the inside of the hardtop or soft top, as dust often accumulates there.
3. Floor Mats: If you use rubber or heavy-duty floor mats, remove and wash them separately. A stiff brush and mild soap work well here.

Step 4: Paint Protection & Surface Treatments

To reduce future cleaning efforts, consider applying protective coatings to your Jeep’s exterior.

XPEL Protective Films provide a clear, durable film that covers high-impact areas like fenders, doors, hood, and mirrors. These films help resist scratches from brush, rocks, and road debris. They’re also UV resistant, helping maintain your paint’s color and gloss.

Cleaning becomes easier, mud and bugs are less likely to stick to the smooth surface of the film and washing them off takes less time and effort.

Step 5: Post-Cleaning Physical Inspection

Once your Jeep is clean, it’s time for a walkaround and undercarriage inspection. This is a crucial step many owners skip, but it can help you spot potential issues early.

• Check for Sticks and Debris: After cleaning, inspect your suspension, control arms, skid plates, and brake lines. Debris like sticks and rocks can become lodged in hard-to-see places, potentially causing damage when you hit the road again.
• Look for Leaks or Damage: Cleaning your Jeep exposes hidden issues. Look for oil leaks, damaged hoses, or fluid drips.
• Check Tires and Wheels: Inspect for punctures, cuts, or embedded debris in your tires. Also check for bent rims or missing lug nuts.

***

Cleaning your Jeep isn’t just about aesthetics—it’s an essential maintenance task.

With tools like Armorlite floor coverings and XPEL paint protection, you can make the process faster, easier, and more effective. Regularly cleaning and inspecting your vehicle keeps it trail-ready and preserves its rugged good looks for years to come.

So, the next time you come back from a muddy adventure, take the time to do it right.  Your Jeep will thank you!